C Capstan

WORMGEAR CAPSTAN

Self-braking worm gear capstan drives with electric, hydraulic or even pneumatic motors, available in on-deck or below-deck build types. The on-deck drive is equipped with a waterproof motor for intermittent use. The below-deck drive is equipped with a drip water-proof motor and a mounting plate with an extra self-aligning bearing suitable for high static loads such as with mooring ropes. Pneumatic drives are available upon request.

PLANETARY CAPSTAN

Featuring a cast iron capstan head mounted on a heavy duty planetary gearbox. The entire drive is mounted in a watertight tube frame providing optimal protection from the elements. Pneumatic drives are available upon request. Capstans up to 15 tons can be offered upon request.

STANDARD FEATURES

• Heavy duty wormgear or planetary gearbox
• IP 54 braked motor 400 VAC / 3- phases / 50 Hz for planetary capstans
• IP 56 TENV cast iron 400 V AC / 3-phase / 50 Hz non-braked motor for on-deck wormgear capstans
• IP 54 400 V AC / 3 phases / 50 Hz non-braked motor for under-deck wormgear capstans
• Single speed and one direction only (electric capstans only)
• Orbit or radial piston type hydraulic motor
• Vertical cast iron warping head according to ISO 6482
• Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 5010

AVAILABLE OPTIONS

• Cast iron motor for planetary capstans
• Explosion proof motorsaring build in planetary gearbox for one direction (replaces brake)
• 2 speed motors
• Alternative speeds
• Alternative supply voltages
• Horizontal warping head configuration
• Marine / offshore coating systems

AVAILABLE CONTROL OPTIONS

• Control box IP 55 with IP 65 foot pedal (single speed, one direction) control built acc. to NEN 1010
• Control box IP 66 with IP 66 foot pedal (two speed, two directions) control built acc. to NEN 1010
• Frequency inverter and proportional foot pedal for variable speed control
• Proportional local or remote control valve (pneumatic or hydraulic)