HD3C ATEX Zone 1 Push & Geared Trolley

STANDARD FEATURES

• Equipment class Gas II 2G EX h IIC T4 Gb
• Equipment classification Dust II 2D EX h IIIC T135°C Db
• Unique 3 bolt design which ensures stability and safe situation
• Adjustable suspension bolts (see table)
• Wheel break support and anti-tilt device integrated
• Trolley wheels with life time lubricated bearings
• Suitable for all types of beams
• Surface treatment trolley electric galvanized up to 64kN chassis type
• Surface treatment trolley 2 layer paint system, RAL7021, chassis type 84kN and higher
• Hand chain stainless steel
• Rubber buffers mounted on the trolley
• Solid bronze wheels

AVAILABLE OPTIONS

• Special surface protection according to ISO 12944
• Extended chain wheel drive (max. 300mm), dimension “M”
• Parking device for parking in unloaded condition
• Special side plates to increase dimension “E”
• Stainless steel nameplate with tag number
• 3.1 load test certificate
• 3.1 material certificate for load bearing trolley parts

REMARK

• The minimum beam radius is based on the maximum beam width which is specified in the table. For smaller curved beams always contact us or your local agent for clarification.
• Maximum INP profile restriction for 6kN = INP220, 11kN = INP300, 22kN = INP360, 33kN = INP400, 52/64kN = INP450
• Equipment is executed with non-sparking materials for fast mechanical contact parts

Other push & geared trolleys:

• HD3C ATEX Zone 2 Push & Geared Trolley
• HD3C Stainless Steel Push & Geared Trolley